1 Purpose
This document sets category-specific preparation, presentation, service, and carryover controls for Chilled, Frozen, Dairy, and Dessert Products within the defined Good Taste Awards standards system.
2 Scope
This document applies to the requirements, decisions, records, controls, and outputs expressly identified under Chilled, Frozen, Dairy, and Dessert Products. Award scope and exclusions are defined by GTA-STD-100; this document shall not create an additional award dimension. Operational prerequisites identified here affect assessment validity and never constitute product certification.
3 Authority and interpretation
The Assessment Operations Lead owns GTA-MOD-316; the Standards Authority approves it. formal verbs, defined terms, stable requirement identities, policy constants, and generated representations shall be interpreted under GTA-GOV-002, GTA-GOV-005, and the defined registers.
3.1 Registered relationships
| Relationship | Direction | Related document |
|---|---|---|
implements | outbound | GTA-SCH-303 |
governed_by | outbound | GTA-GOV-001 |
drafted_under | outbound | GTA-GOV-002 |
4 Requirements
GTA-MOD-316-R001 — Subcategory assignment
The Assessment Operations Lead shall cover chilled foods, frozen foods, dairy products, dairy alternatives, ice creams, and chilled or frozen desserts.
GTA-MOD-316-R002 — Cold-chain state
The Assessment Operations Lead shall protect product condition from receipt through service.
GTA-MOD-316-R003 — Thaw and temper
The Assessment Operations Lead shall control duration, environment, endpoint, and batch linkage.
GTA-MOD-316-R004 — Frozen texture
The Assessment Operations Lead shall control scoop, portion, melt, crystal condition, and service sequence.
GTA-MOD-316-R005 — Chilled texture
The Assessment Operations Lead shall control temperature-dependent firmness, viscosity, and aroma release.
GTA-MOD-316-R006 — Separation and stirring
The Assessment Operations Lead shall apply representative homogenization without damaging intended structure.
GTA-MOD-316-R007 — Rapid service
The Assessment Operations Lead shall use small batches and defined holding limits.
GTA-MOD-316-R008 — Palate coating
The Assessment Operations Lead shall control fat, sweetness, cold adaptation, and recovery.
5 Category applicability and selection
| Parameter | Defined value or selection rule |
|---|---|
| Included subcategories | chilled_food, frozen_food, dairy, dairy_alternative, ice_cream, chilled_dessert, frozen_dessert |
| Representative state | defined_cold_chain_and_declared_consumption_state |
| Portion basis | representative_scoop_slice_piece_or_homogenized_quantity |
| Mandatory measurements | storage_condition, thaw_or_temper_endpoint, service_condition, holding_limit, portion_quantity, melt_or_separation_state |
| Carrier rule | prohibited_unless_product_definition_requires_a_defined_integral_component |
| Order class | assign_from_cold_adaptation_sweetness_fat_coating_acidity_and_aroma |
| Inability conditions | cold_chain_failure, undefined_thaw, crystal_or_melt_damage, temperature_drift, destructive_stirring |
6 Category control matrix
| Control ID | Variable | Required control | Source of setting | Evidence | Out-of-control action |
|---|---|---|---|---|---|
GTA-MOD-316-C01 | Subcategory assignment | Cover chilled foods, frozen foods, dairy products, dairy alternatives, ice creams, and chilled or frozen desserts. | approved product instruction or module default | preparation/service record | stop, correct, replace, or incident review |
GTA-MOD-316-C02 | Cold-chain state | Protect product condition from receipt through service. | approved product instruction or module default | preparation/service record | stop, correct, replace, or incident review |
GTA-MOD-316-C03 | Thaw and temper | Control duration, environment, endpoint, and batch linkage. | approved product instruction or module default | preparation/service record | stop, correct, replace, or incident review |
GTA-MOD-316-C04 | Frozen texture | Control scoop, portion, melt, crystal condition, and service sequence. | approved product instruction or module default | preparation/service record | stop, correct, replace, or incident review |
GTA-MOD-316-C05 | Chilled texture | Control temperature-dependent firmness, viscosity, and aroma release. | approved product instruction or module default | preparation/service record | stop, correct, replace, or incident review |
GTA-MOD-316-C06 | Separation and stirring | Apply representative homogenization without damaging intended structure. | approved product instruction or module default | preparation/service record | stop, correct, replace, or incident review |
GTA-MOD-316-C07 | Rapid service | Use small batches and defined holding limits. | approved product instruction or module default | preparation/service record | stop, correct, replace, or incident review |
GTA-MOD-316-C08 | Palate coating | Control fat, sweetness, cold adaptation, and recovery. | approved product instruction or module default | preparation/service record | stop, correct, replace, or incident review |
7 individual product instruction precedence
A individual product instruction may supply a measurable setting where this module intentionally requires individual product selection. It shall be approved before blind coding, shall describe ordinary intended preparation, and shall not disclose brand identity to assessors. It shall not change the liking scale, panel composition, star thresholds, result meaning, or role authority.
The approved preparation plan shall state input quantity, equipment, sequence, endpoint, portion, vessel, service condition, holding control, order class, palate recovery, measurement method, tolerance or acceptance rule, and action for nonconformity. A missing mandatory setting shall stop preparation rather than invite operator estimation.
8 Conformity and records
Conformity with Chilled, Frozen, Dairy, and Dessert Products requires evidence comprising the preparation plan, batch record, service event, measurement, and deviation state. The record for each applicable GTA-MOD-316 requirement shall permit reconstruction without relying on an unrecorded explanation.
Evidence created under GTA-MOD-316 shall use stable identifiers, immutable event sequence numbers, and machine event timestamps. A correction shall be append-only. A nonconformity shall place the affected object in a non-releasable state until its consequence and confirmed disposition are recorded. Role combination remains subject to the mandatory separation rules.